Front Outer CV Joint (Aluminum Alloy) for Tesla Model S/X — TL-5003

Front Outer CV Joint for Tesla Model S/X — TL-5003

Front Outer CV Joint (Aluminum Alloy) for Tesla Model S/X — TL-5003

Estimated Delivery:Nov 06 - Nov 10

Premium aftermarket front outer CV joint for Tesla Model S and Model X, part number TL-5003. Features durable aluminum alloy housing for reliable torque transfer during steering. CRITICAL: PROFESSIONAL INSTALLATION ONLY. HUB NUT TORQUE & WHEEL ALIGNMENT MANDATORY. Not for DIY beginners.

Part Number: TL-5003
Fitment: Tesla Model S / Model X (Verify VIN & Year)
Position: Front Left or Front Right (Specify when ordering)
Type: Outer CV Joint Assembly (Aluminum Alloy)
Condition: Brand New

⚠️ Installation & Safety Warning: Replacing the outer CV joint requires hub nut removal and wheel alignment. CRITICAL:

Hub Nut: MUST use HEAVY-DUTY BREAKER BAR to remove/install hub nut. DO NOT STRIP THREADS.
Snap Ring: MUST verify SNAP RING IS FULLY SEATED in groove. LOOSE SNAP RING = JOINT POPS OUT WHILE DRIVING.
Wheel Alignment: MUST perform WHEEL ALIGNMENT after installation. NO ALIGNMENT = TIRE WEAR / REDUCED PART LIFE.
Torque: MUST torque hub nut to SPEC (e.g., 350-400 Nm). LOOSE NUT = WHEEL BEARING DAMAGE / WHEEL LOSS.
Professional Only: NOT A DIY PART. Improper installation = DRIVETRAIN FAILURE / SAFETY HAZARD.