Front Inner CV Joint (Aluminum Alloy) for Tesla Model Y — TL-7001T

Front Inner CV Joint for Tesla Model Y — TL-7001T

Front Inner CV Joint (Aluminum Alloy) for Tesla Model Y — TL-7001T

Estimated Delivery:Nov 06 - Nov 10

Premium aftermarket front inner CV joint for Tesla Model Y, part number TL-7001T. Features durable aluminum alloy housing for reliable torque transfer during suspension travel. CRITICAL: PROFESSIONAL INSTALLATION ONLY. HUB NUT TORQUE & SNAP RING VERIFICATION MANDATORY. Not for DIY beginners.

Part Number: TL-7001T
Fitment: Tesla Model Y (Verify VIN & Year)
Position: Front Inner CV Joint (Differential/Transaxle Side, Left or Right)
Type: Inner CV Joint Assembly (Aluminum Alloy)
Condition: Brand New

⚠️ Installation & Safety Warning: Replacing the front inner CV joint requires vehicle lift and precision assembly. CRITICAL:

Vehicle Lift: MUST use 2-POST LIFT and ENGAGE LOCKS. NEVER WORK UNDER JACK ONLY.
Hub Nut: MUST use HEAVY-DUTY BREAKER BAR to remove/install hub nut. DO NOT STRIP THREADS.
Snap Ring: MUST verify SNAP RING IS FULLY SEATED in groove. LOOSE SNAP RING = JOINT POPS OUT WHILE DRIVING.
Grease: MUST add EXACT AMOUNT OF GREASE as specified. TOO MUCH = BOOT BURSTS. TOO LITTLE = JOINT FAILURE.
Boot Clamps: MUST use PROPER CLAMPING TOOL to seal boot. LEAKY BOOT = WATER INGRESS / RAPID WEAR.
Torque: MUST torque hub nut to SPEC (e.g., 350-400 Nm). LOOSE NUT = WHEEL BEARING DAMAGE / WHEEL LOSS.
Professional Only: NOT A DIY PART. Improper installation = DRIVETRAIN FAILURE / SAFETY HAZARD.