Rear Outer CV Joint Repair Kit (L/R) for Tesla Model Y — TL-5002XLB

Rear Outer CV Joint Repair Kit for Tesla Model Y — TL-5002XLB

Rear Outer CV Joint Repair Kit (L/R) for Tesla Model Y — TL-5002XLB

Estimated Delivery:Nov 06 - Nov 10

Premium aftermarket rear outer CV joint repair kit for Tesla Model Y, part number TL-5002XLB. Features durable housing and high-performance grease for reliable torque transfer during steering. CRITICAL: PROFESSIONAL INSTALLATION ONLY. HUB NUT TORQUE, SNAP RING VERIFICATION & WHEEL ALIGNMENT MANDATORY. Not for DIY beginners.

Part Number: TL-5002XLB
Fitment: Tesla Model Y (Verify VIN & Year)
Position: Rear Outer CV Joint (Wheel Side, Left or Right)
Type: CV Joint Repair Kit (Housing + Boot + Grease + Clamps)
Condition: Brand New

⚠️ Installation & Safety Warning: Replacing the rear outer CV joint requires hub nut removal and wheel alignment. CRITICAL:

Hub Nut: MUST use HEAVY-DUTY BREAKER BAR to remove/install hub nut. DO NOT STRIP THREADS.
Snap Ring: MUST verify SNAP RING IS FULLY SEATED in groove. LOOSE SNAP RING = JOINT POPS OUT WHILE DRIVING.
Grease: MUST add EXACT AMOUNT OF GREASE as specified. TOO MUCH = BOOT BURSTS. TOO LITTLE = JOINT FAILURE.
Boot Clamps: MUST use PROPER CLAMPING TOOL to seal boot. LEAKY BOOT = WATER INGRESS / RAPID WEAR.
Torque: MUST torque hub nut to SPEC (e.g., 350-400 Nm). LOOSE NUT = WHEEL BEARING DAMAGE / WHEEL LOSS.
Wheel Alignment: MUST perform WHEEL ALIGNMENT after installation. NO ALIGNMENT = TIRE WEAR / REDUCED PART LIFE.
Professional Only: NOT A DIY PART. Improper installation = DRIVETRAIN FAILURE / SAFETY HAZARD.