Bearing Shaft Screw ZCLS-D-3Y for EV Motor & Suspension — Precision Clamping Fastener

Bearing Shaft Screw ZCLS-D-3Y for EV Applications

Bearing Shaft Screw ZCLS-D-3Y for EV Motor & Suspension — Precision Clamping Fastener

Estimated Delivery:Nov 06 - Nov 10

Premium bearing shaft screw ZCLS-D-3Y for EV electric motors, gearboxes, and suspension systems. Designed to secure bearings without inducing misalignment or deformation. TORQUE-TO-YIELD DESIGN. SINGLE USE ONLY (IF LOCKING TYPE). PROFESSIONAL INSTALLATION REQUIRED.

Part Number: ZCLS-D-3Y
Application: EV Drive Unit, Reduction Gear, Wheel Hub, Suspension Links
Type: Bearing Shaft Screw / Clamping Screw
Material: High-Grade Alloy Steel / Stainless (Verify Spec)
Condition: Brand New

⚠️ Installation & Safety Warning: Installing bearing shaft screws requires precision torque, angle tightening, and gap verification. CRITICAL:

Single Use: IF LOCKING TYPE, DO NOT REUSE. NEW SCREW MANDATORY. REUSE = BEARING FAILURE.
Torque Method: MANDATORY use TORQUE + ANGLE method. DO NOT GUESS. FOLLOW SERVICE MANUAL.
Thread Check: INSPECT THREADS BEFORE INSTALL. CLEAN & DEBURR. NO CROSS-THREADING.
Gap Verification: MUST check AXIAL END PLAY after tightening. OUT OF SPEC = SCREW LOOSENING / BEARING OVERHEAT.
Professional Only: NOT A DIY PART. Improper torque = MOTOR SCANNING / GEARBOX CATASTROPHIC FAILURE.