Rear Steering Knuckle Bushing for Tesla Model 3 / Model Y — 1188412-01-E

Rear Steering Knuckle Bushing for Tesla Model 3 / Model Y — OEM 1188412-01-E

Rear Steering Knuckle Bushing for Tesla Model 3 / Model Y — 1188412-01-E

Estimated Delivery:Nov 06 - Nov 10

Premium replacement rear steering knuckle bushing for Tesla Model 3 and Model Y, part number 1188412-01-E. This precision-engineered bushing is designed to restore factory suspension geometry, eliminate clunking noises over bumps, and reduce excessive tire wear. CRITICAL: This is a BUSHING ONLY (not the full steering knuckle assembly). Fits Model 3 and Model Y ONLY. NOT compatible with Model S or Model X. Verify exact fitment via VIN.

OEM Part Number: 1188412-01-E
Fitment: Tesla Model 3 / Model Y (Verify exact year via VIN)
Position: Rear Steering Knuckle
Type: Suspension Bushing (Bushing Only)
Condition: Brand New

⚠️ Installation & Safety Warning: Replacing rear knuckle bushings is a highly technical suspension procedure. CRITICAL:

Special Tool Required: Removing and installing pressed-in knuckle bushings requires a hydraulic bushing press tool or a specialized slide hammer puller. Do NOT attempt to hammer the bushing out, as this will damage the aluminum steering knuckle.
Suspension Alignment: Any work on the rear steering knuckle alters the suspension geometry. A professional 4-wheel alignment is MANDATORY after installation.
Stress Relief: Related suspension bolts must be torqued to specification with the vehicle at Ride Height (suspension loaded) to prevent premature bushing failure.
Inspect Knuckle: Before pressing in the new bushing, inspect the aluminum knuckle bore for scoring or corrosion. If damaged, the entire steering knuckle must be replaced.