BLE TPMS Sensor for Tesla Model 3/Y/S/X (2021+) — 1490701-01-B

BLE TPMS Sensor for Tesla Model 3/Y/S/X (2021+) — 1490701-01-B

Estimated Delivery:Sep 16 - Sep 20
Free Shipping & Returns: On all orders over $75

Premium Bluetooth Low Energy (BLE) TPMS sensor for Tesla Model 3, Y, S, and X (2021+). This sensor replaces older RF units and enables real-time tire pressure display on the vehicle touchscreen without third-party apps. Features automatic self-learning: simply install and drive above 30 km/h for 1-3 minutes to pair. CRITICAL: This is a BLE sensor for 2021+ vehicles ONLY. It is NOT compatible with 2017-2020 Model 3/Y (which use 433MHz RF sensors). Verify exact fitment via VIN.

OEM Part Number: 1490701-01-B
Fitment: Tesla Model 3/Y/S/X (2021+ ONLY)
Type: BLE TPMS Sensor (Bluetooth Low Energy)
Color: Black
Condition: Brand New

⚠️ Installation & Safety Warning: Replacing the TPMS sensor requires removing the tire from the wheel. Always activate Jack Mode before lifting. Crucial:

No Programming Needed: This sensor uses Tesla’s automatic self-learning protocol. Do NOT use generic TPMS programming tools; they cannot program BLE sensors.
Mounting Torque: Tighten the sensor nut to 8 Nm (5.9 lbs-ft) using an 11mm deep socket. Over-torquing will crack the sensor housing; under-torquing will cause air leaks.
Self-Learning: After installation, drive at >30 km/h for 1-3 minutes to trigger automatic pairing. If the warning light persists, check for sensor damage or incorrect part number.
Battery Life: Internal battery is non-replaceable; typical lifespan is 5-7 years.