Rear Windshield Upper Seal for Tesla Model 3 — 1111787-00-A

Rear Windshield Upper Seal for Tesla Model 3 — OEM 1111787-00-A

Rear Windshield Upper Seal for Tesla Model 3 — 1111787-00-A

Estimated Delivery:Nov 06 - Nov 10

Premium replacement rear windshield upper seal for Tesla Model 3, part number 1111787-00-A. This precision-molded EPDM rubber seal provides a watertight and airtight barrier between the backlight glass and the trunk lid, preventing water intrusion and wind noise. CRITICAL: Installation REQUIRES backlight glass removal. This is a ONE-TIME-USE adhesive part. MUST clean surface with IPA wipes before application. Verify exact fitment via VIN.

OEM Part Number: 1111787-00-A
Fitment: Tesla Model 3 (Verify exact year via VIN)
Position: Rear Windshield Upper / Backlight Glass
Type: Upper Seal / Weatherstrip
Material: EPDM Rubber with Adhesive Backing
Condition: Brand New

⚠️ Installation & Safety Warning: Replacing the rear windshield upper seal is a high-risk, professional-only procedure. CRITICAL:

Glass Removal MANDATORY: You MUST remove the backlight glass to access and replace this seal. DO NOT attempt this without proper glass removal tools and training. Risk of glass breakage and heated grid damage is extremely high.
Surface Prep: After removing the old seal, MUST use a razor blade to remove all old adhesive and urethane. MUST clean the surface with IPA (Isopropyl Alcohol) wipes and WAIT 1 MINUTE for complete drying.
One-Time-Use: The old seal MUST be discarded. NEVER attempt to reuse or re-adhesive the old seal.
Alignment: Start from one corner and slowly apply the new seal along the old path. Press firmly to ensure adhesion. Ensure the trunk flip seal is properly mated and trimmed.
PPE Required: Wear cut-resistant gloves and safety glasses during glass removal and adhesive cleaning.