Front Right Window Motor & Regulator Assembly for Tesla Model 3 (2017-2023) — 1616443-99-A

Front Right Window Motor & Regulator Assembly for Tesla Model 3 — OEM 1616443-99-A

Front Right Window Motor & Regulator Assembly for Tesla Model 3 (2017-2023) — 1616443-99-A

Estimated Delivery:Nov 06 - Nov 10

Premium replacement front right window motor and regulator assembly for Tesla Model 3 (2017-2023), part number 1616443-99-A. This complete assembly restores smooth window operation, proper sealing, and anti-pinch safety functionality. CRITICAL: This is an OEM part, NOT VAICO or aftermarket. NOT compatible with 2024+ Highland Refresh. Post-installation window calibration is MANDATORY. Verify exact fitment via VIN.

OEM Part Number: 1616443-99-A
Fitment: Tesla Model 3 (2017-2023 Only)
Position: Front Right (RH / Passenger Side)
Type: Window Motor & Regulator Assembly (Complete)
Condition: Brand New

⚠️ Installation & Safety Warning: Replacing a window regulator is a complex mechanical and electrical procedure. CRITICAL:

Calibration Required: After installation, the window MUST be calibrated using the driver-side master switch (Raise to stall → Lower to stall → Raise to stall) or via Service Mode on the touchscreen. Failure to calibrate causes one-touch auto-up/down failure.
Door Disassembly: Access requires removing the door trim panel, inner water shield, and door speaker. Use plastic trim tools only to prevent damage to the soft-touch trim or paint.
Torque Specifications: Tighten the regulator mounting nuts to 10 Nm and speaker screws to 1.8 Nm. Do NOT use impact wrenches for final tightening.
Connector Care: Ensure the door handle controller and pressure sensor connectors are securely re-engaged before reassembling the door panel.